Splicers for Projection and Editing

 

inc47b-scm 

M.3-16mm Special (INC47/B-SCM)

Perforates and cuts the adhesive tape to join 16 mm film.

  • Micrometrical registration pins regulator to obtain always perfect butt splices also with old and retired film.

  • Retractable pins for splicing of non-standard pitched film.

  • Film-hold-down-springs for curled film.

  • Guide lines for tape application.

  • Spring-loaded knife, always ready for the next cut.

  • Anti-skid plate with rubber foot mounting to keep the splicer stationary and to collect the punched-out tape rectangles.

For a better result in time we recommend to use a proper splicing tape like our CIR (NAS2 15mmx10mt Tape Clear Edit)

Available with additional diagonal cutter for magnetic tape:

inc47a-scm 

M.3-16mm 2T Special (INC47/A-SCM)

For a better result in time we recommend to use a proper splicing tape like our CIR (NAS2 15mmx10mt Tape Clear Edit)

inc48 

M.3-16mm 2T Double Perf.Special (INC48)

Perforates and cuts the adhesive tape to join 16 mm film and magnetic tape with double perforations.

  • Micrometrical registration pins regulator to obtain always perfect butt splices also with old and retired film.

  • Alternating pins for single frame magnetic tape cut and retractable pins for splicing of non-standard film.

  • Film-hold-down-springs for curled film.

  • Guide lines for tape application.

  • Spring-loaded knives, always ready for the next cut.

  • Anti-skid plate with rubber foot mounting to keep the splicer stationary and to collect the punched-out tape rectangles.

For a better result in time we recommend to use a proper splicing tape like our CIR (NAS2 15mmx10mt Tape Clear Edit)

inc15 

M.3-17,5mm (INC15)

Perforates and cuts the adhesive tape to join 17,5 mm magnetic tape.

  • Auxiliary guide channel to allow the cut of even 1 only perforation from the end of magnetic tape during editing and synchronizing operations.

  • Magnetic tape diagonal cutter.

For a better result in time we recommend to use a proper splicing tape like our (CIR (NAS2 15mmx10mt Tape Clear Edit)

inc51b-scm 

M.3-35 mm Special (INC51/B-SCM)

Perforates and cuts the adhesive tape to join 35mm film.

  • Micrometrical registration pins regulator to obtain always perfect butt splices also with old and retired film.

  • Spring-loaded knife, always ready for the next cut.

  • Anti-skid plate with rubber foot mounting to keep the splicer stationary and to collect the punched-out tape rectangles.

For a better result in time we recommend to use a proper splicing tape like our CIR (NAS8 25mmx10mt Tape Clear Edit).

inc51a-scm 

Available with additional diagonal cutter for magnetic tape:

M.3-35mm 2T Special (INC51/A-SCM)

For a better result in time we recommend to use a proper splicing tape like our CIR (NAS8 25mmx10mt Tape Clear Edit).

inc44b 

M.3-35mm Pos/2Frames Special (INC44/b)

Perforates and cuts a special 38mm wide adhesive tape which covers exactly 2 frames of 35 mm film with positive perforation.

  • Micrometrical registration pins regulator to obtain always perfect butt splices also with old and retired film.

  • Spring-loaded knife, always ready for the next cut.

  • Anti-skid plate with rubber foot mounting to keep the splicer stationary and to collect the punched-out tape rectangles.

  • For a better result in time we recommend to use a proper splicing tape like our CIR (NAS9B 38mmx10mt Tape Clear Edit).
inc19 

M.3-35mm Cinemascope Special (INC19)

Perforates and cuts the adhesive tape to join 35 mm film with cinemascope perforation.

  • Micrometrical registration pins regulator to obtain always perfect butt splices also with old and retired film.

  • Spring-loaded knife, always ready for the next cut.

  • Anti-skid plate with rubber foot mounting to keep the splicer stationary and to collect the punched-out tape rectangles.

  • For a better result in time we recommend to use a proper splicing tape like our CIR (NAS8 25mmx10mt Tape Clear Edit).
inc20 

M.3-70mm Special (INC20)

Perforates and cuts the adhesive tape to join 65mm negative film as well as all 70mm positive film “cinema”. Equipped with side film cutter  to exactly cut on frameline between the film perforation holes.

· *On request the special mask & cutter to apply the adhesive tape on back of film without covering the eventual  sound tracks.

· For a better result we recommend to use a proper splicing tape like ours:

CIR NAS8 25mm x 10 Clear Edit Tape (for Positive film).

CIR NAS10 8,5mm x10mt Clear Edit Tape (for Negative film).

CIR NAS12A 25mm x 20 BLACK SPC (for Negative before processing).

 

Products